Protools 12 takes long starting up osx verification#

If successful then you can likely dismiss any suspicion of hardware failure as a cause for the problem, and concentrate on the OS installation.Д«e sure you initially run a verification on the boot drive using Disk Utility (available in the 'Utilities' menu in the OS X installer) since a fault with the volume format can prevent the system from booting. If the problem appears to be with the OS, try booting off another boot source such as an external drive or the OS X installation DVD. This information will be useful when contacting technical support for further solutions.Д«oot to installation DVD or external drive It might be something that explicitly says a word like 'Warning,' or it may just freeze at a certain point when loading or configuring a component of the OS. If the system pauses at any point, or shows any warnings, make a note of what the errors or other output is. To get to verbose mode, hold down the Command-V keys when starting up, and the system will show white text on a black screen that will say what the system is doing during boot. If the system still does not boot after a PRAM or SMC reset, try booting the system into verbose mode, which will output exactly what the system is doing at each stage in the boot process.

Protools 12 takes long starting up osx how to#

The procedure for resetting the SMC will be different for each system, and Apple has a knowledgebase article that outlines how to do this for various Mac models. Allow the system to cycle through a few resets and then release the keys to allow it to boot normally.

To reset the PRAM, reboot the system while holding the Option-Command-P-R keys, and the system will continually reset while these keys are held. These hold boot and hardware configuration settings that might be interfering with the boot process, and resetting them to defaults might help. If the system will not show any boot activity, such as the gray or blue boot screens, then try resetting the PRAM and SMC on the system.

Protools 12 takes long starting up osx update#

Additionally, you can try reapplying the latest Combo updater for your version of OS X to replace any included extensions that might have been corrupted in the initial update attempt. If it does boot, then you can try clearing caches or removing third-party extensions that might be causing the problems. This should bypass the loading of unnecessary kernel extensions and hopefully allow the Mac to start up. If the computer still does not boot, try booting to Safe Mode by holding the Shift key when starting up. If you have multiple monitors, then unplug all but the main one, and try booting the Mac again. Remove all peripheral devices and all expansion cards.

Therefore, the first thing to do is to strip the Mac down to its basic components. Sometimes interference from third-party hardware can cause odd boot problems, especially when the OS configuration changes. If this happens, there are a few steps you can take to try to clear the problem before taking the computer in for servicing: At other times, the system may not boot at all and show a blank screen even though the fans are spinning. Sometimes the system will hang at a specific boot screen such as the gray Apple, or at a blank blue screen. On rare occurrences people may find that after updating their Macs the system will not boot.